Samson 3730-4 - 8 Parameter Lists

8 Parameter lists
Legend
The parameter index is written in parentheses after the parameter description in the following
tables.
Class of memory: S
D
N
Static parameter
Dynamic parameter
Non-volatile parameter
Read/write
capability:
(access)
r
w
Read capability
Write capability
Supported
modes:
O
M
A
CAS
RCAS
ALL
O/S (out of service) mode
MAN mode
AUTO mode
Cascade mode
Remote cascade mode
O/M/A/CAS/RCAS
Note:
–
Parameters marked with an asterisk (*) are included in the cyclic data exchange.
All other parameters are included in the acyclic data exchange.
–
Values/settings in brackets [] are default settings.
–
More information on the parameters in the EXPERTplus diagnostics can be found in the
Operating Instructions EB 8389 EN.
38 KH 8384-4 EN
Parameterlisten