Samson 3730-4 Configuration Manual

8.3 AO Transducer Block, Slot 1 · Manufacturer-specific parameters
ACTIVE_IDENT_NUMBER (205)
Storage class: – · Read capability (r)
GSD file in the positioner
If the positioner is in the compatibility mode, it can run using the following GSD files:
• 3785: 3785 Profile 2
• 071D: 3785 Profile 3
• 0688: 3730-4 Profile 3.01
AUTOSTART_HYS (194)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Indicates the minimum interval between the hysteresis tests (EXPERTplus)
BLOCKING_POSITION (166)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
CHARACT_TYPE (173)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Type of characteristic.
• Max. 32 characters, [no text]
CLOSING_DIRECTION (165)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
COUNTER_INIT_START (198)
Storage class: – · Read capability (r)
Number of initialization cycles that have been performed since the last reset
CYCLE_COUNTER_LIMIT (210)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Max. cycle counter limit
KH 8384-4 EN 77
AO Transducer Block, Slot 1 · Manufacturer-specific parameters

Samson 3730-4 Specifications

General

Brand	Samson
Model	3730-4
Category	Valve Positioners
Language	English