Samson 3730-4 - DI1;2 Transducer Block, Slot 2;3 · Profile-Specific Parameters

8.3.2 DI1/2 Transducer Block, Slot 2/3 · Profile-specific parameters
ALERT_KEY (64)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Identification number of the plant section
• [0]
ALM_SUM (67)
Storage class: – · Read capability (r)
Current states of the process alarms in DI Transducer Block
• [0]
BLOCK_OBJ (60)
Storage class: – · Read capability (r)
MODE_BLK (66)
Storage class: – · Read capability (r)
Current mode
PV_D (72)
Storage class: – · Read capability (r)
Process variable (forwarded to the Function Block including status)
SENSOR_ID (69)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Identification of sensor used (model type)
SENSOR_MAN (71)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Sensor manufacturer
SENSOR_SER_NUM (70)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Sensor's serial number
SENSOR_WIRE_CHECK (68)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
KH 8384-4 EN 97
DI1/2 Transducer Block, Slot 2/3 · Profile-specific parameters