8.1 Physical Block, Slot 0 · Profile-specific parameters
ALERT_KEY (20)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Identification number of the plant section
ALM_SUM (23)
Storage class: – · Read capability (r)
Current state of process alarms in the Physical Block.
BLOCK_OBJ (16)
Storage class: – · Read capability (r)
COND_STATUS_DIAG (43)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Select whether the positioner is to be used
– according to Profile 3.01 or
– with condensed state
A change is not permissible in the DATA_EXCHANGE (cyclic) state.
DESCRIPTOR (36)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Any desired text to describe the application. The text is saved in the field device.
• Max. 32 characters, [no text]
DEVICE_CERTIFICATION (33)
Storage class: – · Read capability (r)
Certification · Specifies whether explosion protection certification is available for Type 3730-4.
DEVICE_ID (27)
Storage class: – · Read capability (r)
Positioner’s model number
DEVICE_INSTAL_DATE (38)
Storage class: N · Read/write capability (r/w) · Supported modes: ALL
Date when the positioner was installed
KH 8384-4 EN 39
Physical Block, Slot 0 · Profile-specific parameters
To Next Page
Loading...
