DATALOGGER (185)
Storage class: – · Read capability (r)
Structure of read and write parameters of the data logger (EXPERTplus)
Element Parameter
0 DATALOGGER_SELECT (selection for data logger)
1 TRIGGER_SELECT (trigger status)
2 SAMPLE_RATE (scan rate)
3 START_VALUE (trigger value)
4 LOGGING_LIMIT
5 PRETRIGGER_TIME
DATALOGGER_2 (211)
Storage class: – · Read capability (r)
DATALOGGER_READ (186)
Storage class: – · Read capability (r)
Structure of read parameters of the data logger (EXPERTplus)
Element Parameter
0 TESTINFO (test information)
1 MAX_PRETRIGGERZEIT (max. pretrigger time)
2 FORTSCHRITT (progress flag)
3 ZÄHLER_TAGE (day counter)
4 ZÄHLER_STUNDEN (hour counter)
5 ZÄHLER_MINUTEN (minute counter)
6 ZÄHLER_SEKUNDEN (seconds counter)
7 ZÄHLER_100MS_TAKT (100 ms counter)
DATA_READ_2 (212)
Storage class: – · Read capability (r)
DELAY_TIME (181)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Delay time (reset criterion when closed-loop operation monitoring is in progress). If the entered
DELAY_TIME is exceeded and the system deviation is outside the specified TOLERANCE_BAND, a con-
trol loop error is indicated. Determined from the minimum transit time during initialization.
• [30]
78 KH 8384-4 EN
AO Transducer Block, Slot 1 · Manufacturer-specific parameters
To Next Page
Loading...
