FEATURE (42)
Storage class: – · Read capability (r)
Optional existence and state of the feature integrated into the device
Supported/enabled (Note: The structure for supported and enabled are identical!)
• 0 = Not supported/not enabled
• 1 = Supported/enabled
Byte Bit Element [Default] Description
0 0 CONDENSED_STATUS [1] Status and diagnosis complying
with 'condensed status and diagnostic
messages' extension
0 1 EXPANDED_STATUS/DIAGNOSIS [1] Status and diagnostics acc. to
Profile 3.01
0 2…7 Reserved [0]
1 0…7 Reserved [0]
2 0…7 Reserved [0]
3 0…7 Reserved [0]
HARDWARE_REVISION (25)
Storage class: – · Read capability (r)
Hardware version (electronics/mechanics)
HW_WRITE_PROTECTION (41)
Storage class: – · Read capability (r)
Position of the write protection switch on the device
• 0 · Not write-protected
• 1 · Write-protected
IDENT_NUMBER_SELECTOR (40)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Used to select the ID number
• 0 · Profile-specific ID (0x9710), PA139710.GSD
• 1 · Manufacturer-specific ID (0x07ID), SAMS071D.GSD
LOCAL_OP_ENA (39)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Local operation enabled
If communication fails for a time longer than 30 seconds, local operation will be enabled automatically
• 0 · Disabled
• 1 · Enabled
44 KH 8384-4 EN
Physical Block, Slot 0 · Profile-specific parameters
To Next Page
Loading...
