ACT_STROKE_TIME_INC (90)
Storage class: – · Read capability (r)
Specifies the minimum transit time to reach OPEN position [s] (Code 40)
The minimum transit time to reach OPEN (100 % position) position is the actual time in seconds that the
system (consisting of positioner, actuator and valve) needs to move through the rated travel range/an-
gle of rotation to open the valve (measured during initialization).
• [1.0 s]
ACTUATOR_ACTION (143)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Sets the fail-safe action to be performed by the actuator in case of a supply air failure, determined
automatically during initialization.
• 0 · Not initialized
• 1 · Opening (towards 100 % position)
• 2 · Closing (towards 0 % position)
• 3 · None/saving (position remains kept)
ACTUATOR_MAN (140)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Manufacturer of the actuator mounted on the control valve
ACTUATOR_SER_NUM (145)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Serial number of the actuator used with the positioner.
ACTUATOR_TYPE (142)
Storage class: – · Read capability (r)
Type of actuator used
• 0 · Electropneumatic
• 1 · Electric
• 2 · Electrohydraulic
• 3 · Others
ADD_GEAR_ID (148)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Manufacturer ID of any additional components
ADD_GEAR_SER_NUM (146)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Serial number of any additional components
KH 8384-4 EN 69
AO Transducer Block, Slot 1 · Profile-specific parameters
To Next Page
Loading...
