STARTUP_PARA (207)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Start-up parameters
• TRANS1_INIT_METHOD (initialization method (MAX, NOM, MAN, SUB)
• TRANS1_MOVING_DIRECTION (direction of action)
• TRANS1_LIN_TYPE (type of characteristic)
• TRANS1_INIT_WITH_REF_TEST (initialization with reference test (yes/no)
• TRANS1_BLOCKING_POSITION (blocking position)
STAT_KENNLINIE_RW (204)
Storage class: S · Read/write capability (r/w) · Supported modes: ALL
Structure of the static characteristic
Element Parameter
0 START
1 ENDE (end)
2 WARTEZEIT_NACH_SPRUNG (delay time after step)
3 ANZAHL_BIS_UMKEHR (number of measurement values until turn back)
STAT_KENNLINIE_RW_2 (232)
Storage class: – · Read/write capability (r/w) · Supported modes: ALL
• START
• ENDE (end)
• WARTEZEIT_NACH_SPRUNG (delay time after step)
• ANZAHL_BIS_UMKEHR (number of measurement values until turn back)
STATUS_SOLENOID_VALVE (182)
Storage class: – · Read capability (r)
Status of solenoid valve (Code 45)
STEP_RESPONSE_R (188)
Storage class: – · Read capability (r)
Information parameter on step response (EXPERTplus)
Element Parameter
0 OVERSHOOT_RISING
1 OVERSHOOT_FALLING
2 DEAD_TIME_RISING
3 DEAD_TIME_FALLING
4 TIME_63_RISING
KH 8384-4 EN 89
AO Transducer Block, Slot 1 · Manufacturer-specific parameters
To Next Page
Loading...
