Samson 5857 - Actuator Configuration

7-2 EB 5857 EN
Start-up and conguration
Initialization key
Red and yellow LEDs
Fig.7-1: Location of the initialization key and LEDs
Blinking pattern of the red LED
− Initialization
On
Off
Time in s
7.3 Conguring the actuator with positioner
TheactuatorisconguredwiththeTROVIS-VIEWsoftware(seeAnnexA).Inthiscase,the
serial interface on the actuator is used to connect the actuator to the computer (see the 'De-
sign and principle of operation' section).
Î Refer to uEB6661formoredetailsoncongurationandoperationusingTROVIS-VIEW.