Samson 5857 User Manual

8-10 EB 5857 EN
Operation
8.5 Readings in TROVIS-VIEW
8.5.1 Operating values
The values in the Operating values folder cannot be changed.
In online mode, the current operating values are listed in the 'Operating values' folder. De-
pending on the basic setting, a graph is shown under the Operating values window.
8.5.2 Operating states
Error messages can be read in the Service folder (Operating states).
Operating states and errors are also indicated by the LEDs (see section8.2.1).
8.5.3 Status messages
In the Service folder (Status messages), device and operation parameters are shown.
Device Firmware version
Serial number
Device information
Manufacturing parameters
Operation Operating hours in h
Operating hours at excess temperature in h
Temperature inside device in°C
Highest temperature inside device in°C
Lowest temperature inside device in°C
Actuator strokes Motor running time in h
Attempts
Changes in direction
Note
Note

Samson 5857 Specifications

General

Brand	Samson
Model	5857
Category	Control Unit
Language	English