Samson 5857 - Page 9

EB 5857 EN 1-3
Safety instructions and measures
Referenced standards, directives and regulations
TheType5857ElectricActuatorwithaCEmarkingfulllstherequirementsoftheDirectives
2014/30/EU and 2014/35/EU.
TheType5857ElectricActuatorwithanEACmarkingfulllstherequirementsoftheRegula-
tionsTRCU004/2011andTRCU020/2011.
The'Certicates'sectioncontainsthisdeclarationofconformityandTRCUcerticate.
TheType5857ElectricActuatorisdesignedforuseinlow-voltageinstallations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed, e.g. for SAMSON valves:
uEB5866forType3222GlobeValve
uEB5867forType3222NGlobeValve
uEB3135-1forType2488Pressure-independentControlValve(PICV)
uEB3136forType2488NPressure-independentControlValve(PICV)
uEB5861forType3260Three-wayValve
uEB5863forType3226Three-wayValve