Deleting public holiday
Select the public holiday to be deleted.
Activate the public holiday.
Display: Date blinks.
Select – – .
Confirm that the public holiday is to be deleted.
After setting all public holidays, exit the menu step-by-step and return to the start screen:
Select 'Back'.
Exit overview menu.
Display: Start screen
1.9 Setting parameters
Note:
– Configure the system (see section 2.1.1) before setting any parameters as the parameters
of the application are reset to the default settings on changing the system code number.
– Before setting the parameters in the service menu, the application key number must be en-
tered before pressing the changeover key ( ).
Use the arrow key and enter key ( and ) to select parameters in the menus (2) described
in section 9.
Activate the editing mode for the parameter
Change the parameter.
Confirm parameter setting.
After setting the parameters, exit the menu step-by-step and return to the start screen:
Select 'Zurück' (Back).
Exit overview menu.
Display: Start screen
16 EB 5571-2 EN
Operation
To Next Page
Loading...
