Samson TROVIS 5578-E - Page 23

KA 5578-E EN 23
Operation
q Operating state
The following applies for heating circuits HC1, HC2,
HC3, HC11, HC12 and HC13:
Heating
circuit
Current op.
mode
Valve
opens
closes
Current positioning
value
Circulation pump
(heating) ON/OFF
The following applies for DHW heating:
Current operating
mode
Pump ON/OFF
Storage tank charging pump
Circulation pump (DHW)
Solar circuit pump
See section5.1 for further information.
q Selected system code number
See AnnexA (conguration instructions) for further
information.
¼ Key measured values for the entire system, e.g.
measured values and limits of a ow rate or capacity
limitation, if activated.