Samsung CLX-8540ND - Page 121

Maintenance and Disassembly
Service Manual
3-42
Samsung Electronics
1. Remove the APS sensor cover by unhooking as
shown below.
2. Unplug the harness and remove 2 screws
Replace APS sensors.
Note
When replacing the APS sensor,
connect the harness.
HookHookHook
APS
Sensor
APS
Sensor
HookHookHook
APS
Sensor
APS
Sensor
HookHookHook
APS
Sensor
APS
Sensor
3.2.2.4.4 APS sensor
Note – Before disassembling the APS sensor, remove the scan upper (3.2.2.4.2)