Samsung CLX-8540ND - Scan Assy

Maintenance and Disassembly
Service Manual
3-38
Samsung Electronics
3.2.2.4 Scan Ass’y
3.2.2.4.1 Platen Ass’y
Note – Before disassembling the platen unit, remove the DADF unit (3.2.2.2) and OPE unit(3.2.2.3)
But, when replacing the DADF, Scanner, OPE unit on the whole, it is not necessary.
1. Open the side door. Remove 2 screws. And
remove the Front dummy cover.
2. Remove the 4 screws from front-down side of
scan assy.
1
2
3
1
2
3
7. To remove the LCD panel, remove the 10 screws. Take out the LCD panel after remove the LCD panel
shield.