4.2 Firmware Upgrade
• Firmware upgrade can be performed using USB or network port.
• Network applications (SWAS, SWS) can be used for network port upgrade.
4.2.1 Using the common method
①
Unplug the network cable and fax (Tel) cable.
②
Download the rmware le in the temporary folder. And unzip the le.
③
Delete all current jobs from Job Status window
④
Connect USB cable in the machine (idle state)
⑤
Send rmware le( *.hd ) by usblist2
- Drag the f/w le and Drop down on the usbprn2.exe. And then f/w update will be started automatically.
⑥
Please wait until end reboot.
To Next Page
Loading...
