3.2.2.8 Main Drive Unit
1. Remove the 4 screws and remove the SMPS
cover.
2.Remove3xersfromclutches.Unplugone
connector and remove one screw. And remove
the 3 clutches below.
Note
When disassembling the main drive unit, Don’t
have to unplug the 3 below clutch harness. If you
wanttoreplacetheseclutches,refertothenext
page.
3. Remove the Main Drive Unit after removing 6
screws.
Note
When reassembling the main drive unit, do it after
pressingtheACRsensorwithnger.