4.3 Diagnostic mode (Tech mode)
4.3.1 Diagnostic mode menu
4.3.1.1 Instruction
This document will capture the behavior specications for the GUI Windows for Diagnostics. Each section of
this document describes one feature with a step window image and script.
However, used window image is not xed image from the specication point of view. Acquire detail
information from script. Window image is just example image will be implemented.
4.3.1.2 How to enter diagnostics mode
1. Press 1,2,3 buttons on numerical key simultaneously.
2. Enter password(1934).
3. Press ‘OK’ button.
To Next Page
Loading...
