Samsung CLX-8540ND - Duplex Jam

Troubleshooting
Service Manual
4-4
Samsung Electronics
JAM 2
Case
Trailing edge of media does not pass Exit Sensor within a programmed period of time
after touching Regi Sensor
JAM Removal
1. Open side cover 2. Remove a jammed paper
Or
1. Remove jammed paper from exit
JAM Layout
Exit Sensor
Fuser
Photo
Exit Sensor
Fuser
DUPLEX JAM1
Case
Trailing edge of media passed Exit Sensor, but has not been arrived at Duplex Jam1
Sensor
JAM Removal
1. Open side cover 2. Remove a jammed paper
Or
1. Remove jammed paper from exit
JAM Layout
Exit Sensor
Duplex Jam1 Sensor
Fuser
Photo
Exit Sensor
Duplex Jam1 Sensor
Fuser