Samsung CLX-8540ND - Page 165

Troubleshooting
Service Manual
4-3
Samsung Electronics
■ Description of JAM types and instruction
Jam 0
Case
Leading edge of media does not arrive at Regi sensor within a programmed period of
time after pick-Up (If fails at a time, it tries pick-up again)
JAM Removal
1. Pull out the cassette 2. Remove a jammed paper
Or
1. Open side cover 2. Lift up Frame-Feed_Idle_Roller 3. Remove jammed paper
JAM Layout
Feed Roller
Pick-Up
Photo
Feed Roller
Pick-Up
JAM1 / Duplex JAM0
Case
Leading edge of media does not arrive at Exit Sensor within a programmed period of
time after regi sensor
Or
Leading edge of media does not arrive at Exit Sensor within a programmed period of
time after touching Duplex Ready Sensor
JAM Removal 1. Open side cover 2. Remove a jammed paper
JAM Layout
Exit Sensor
Fuser
Exit Sensor
Fuser
ITB
T2 T2
Registration
Regi Sensor
ITB
Registration
Regi Sensor
Photo
Exit Sensor
Fuser
Exit Sensor
Fuser
ITB
T2 T2
Registration
Regi Sensor
ITB
Registration
Regi Sensor