2.3.4.3 Understanding the Status LED
When the problem occurs, the Status LED indicates the machine’s condition by the light color of it’s action.
• Status
Status Description
Off • The machine is off-line.
• The machine is in power save mode. When data is received, or any
button is pressed, it switches to on-line automatically.
Green On The machine is on-line and can be used.
Blinking • When the backlight slowly blinks, the machine is receiving data from the
computer.
• When the backlight blinks rapidly, the machine is printing data.
Red On • The imaging unit is totally out of lifespan.
Remove the old imaging unit and install a new one.
• The toner cartridge is totally empty. Remove the old toner cartridge and
install a new one.
• A paper jam has occurred.
• The cover is opened. Close the cover.
• There is no paper in the tray. Load paper in the tray.
• The machine has stopped due to a major error. Check the display
message.
• The waste toner container not installated in the machine, or full waste
toner container.
Blinking • A minor error has occurred and the machine is waiting the error to be
cleared. Check the display message. When the problem is cleared, the
machine resumes.
• The toner cartridge is near the end of its life.
Order a new toner cartridge. You can temporarily improve print quality by
redistributing the toner.
To Next Page
Loading...
