3.1.4.3 Replacing the waste toner container
1. Turn the machine off, then wait a few minutes for
the machine to cool.
2. Open the side cover.
3. Open the front cover.
4. Pull the waste toner container out of the machine
using its handle.
5. Remove the container’s cap from the container
as shown below, and use it to close the waste
toner container openings.
6. Take a new waste toner container out of its
package.
7. Insert the new container into position and then
push it to make sure that it is rmly seated in
place.
8. Close the front cover rmly.
9. Turn the machine on.
To Next Page
Loading...
