Samsung CLX-8540ND - Page 130

Maintenance and Disassembly
Service Manual
3-51
Samsung Electronics
4.Removetheprotectionlm.
5. Remove 3 screws and release the Holder HVPS.
6. Remove 1 screw. Release the spring. And take
off the pusher LSU.
7. Unplug the LSU Joint harness. And release the
LSU.
Caution
When reassembling the LSU, be careful not to cut
or oppress the LSU joint harness.
Protection FilmProtection Film
Holder
HVPS
Holder
HVPS
Pusher LSUPusher LSU
LSULSU
LSU Joint HarnessLSU Joint Harness
Protection FilmProtection Film
Holder
HVPS
Holder
HVPS
Pusher LSUPusher LSU
LSULSU
LSU Joint HarnessLSU Joint Harness
Protection FilmProtection Film
Holder
HVPS
Holder
HVPS
Pusher LSUPusher LSU
LSULSU
LSU Joint HarnessLSU Joint Harness
Protection FilmProtection Film
Holder
HVPS
Holder
HVPS
Pusher LSUPusher LSU
LSULSU
LSU Joint HarnessLSU Joint Harness
Holder
HVPS