Samsung CLX-8540ND - Page 143

Maintenance and Disassembly
Service Manual
3-64
Samsung Electronics
4. Hold the Waste Full sensor harness (4 Pin on HVPS) and WTB Full sensor with hands. Carefully pull them
to the direction of arrow until you can see the joint connector.
5. Replace the WTB full sensor.
Waste Full sensor
(4pin on HVPS)
Joint Connector
WTB Full sensor
Waste Full sensor
(4pin on HVPS)
Joint Connector
WTB Full sensor
Waste Full sensor
(4pin on HVPS)
Joint Connector
WTB Full sensor