Code Displayed Name Meaning
Input /
Output
State
Displayed
100-110 T2 Engae Sensor Detect if the T1 Engage is On or Off. Input High[Low]
100-120 Exit Motor Forward Fast Exit Motor Forward Fast On/Off Output On[Off]
100-130 Exit Motor Forward Slow Exit Motor Forward Slow On/Off Output On[Off]
100-140 Duplex Motor Forward Duplex Motor Forward On/Off Output On[Off]
100-150 Duplex Motor Backward Duplex Motor Backward On/Off Output On[Off]
100-160 Duplex Fan1 Run Start/Stop Duplex Fan1 run Output On[Off]
100-170 Duplex Fan2 Run Start/Stop Duplex Fan2 run Output On[Off]
100-190 Dupelx Fan2 Run Ready Detects if Duplex Fan2 runs at normal speed. Input High[Low]
100-240 Waste Toner Motor Waste Toner Motor On/Off Output On[Off]
100-241 Waste Toner Led Waste Toner Led On/Off Output On[Off]
100-250 Waste Toner Full Sensor Detect if the waste toner is full or not. Input High[Low]
100-260 SMPS Fan Run Start/Stop Deve. Fan run Output On[Off]
100-270 SMPS Fan Run Ready Detects if Deve Fan runs at normal speed. Input High[Low]
101-000 Bypass Feed Clutch
Engages drive to pick up a paper from bypass Tray(MP
Tray).
Output On[Off]
101-010 T1 Pick-Up Clutch Engages drive to pick up a paper from tray1. Output On[Off]
101-020 T2 Pick-Up Clutch Engages drive to pick up a paper from tray2. (Optional) Output On[Off]
101-030 T3 Pick-Up Clutch Engages drive to pick up a paper from tray3. (Optional) Output On[Off]
101-050 Registration Clutch Engages drive to registartion rolls. Output On[Off]
101-060 Duplex Feed Clutch Engages drive to feed a paper into duplex path. Output On[Off]
101-070 Duplex Gate Clutch Engages drive to convert paper direction into duplex path. Output On[Off]
101-080 T1 Feed Clutch T1 Feed Clutch On/Off Output On[Off]
101-170 Side Cover Interlock Detect if the side cover is opened or closed. Input Opened/Closed
101-190 Out-Bin Full Sensor Detect when a paper is at Duplex Ready sensor. Input High[low]
102-000 Tray1 Home Position Detect when tray1 is closed. Input Closed[Opened]
102-010 T1 Paper Empty Sensor Detect when paper is in Tray1. Input High[low]
102-020 T1 Size1 sensor Detects whether auto size1 sensor of tray1 is high or low. Input High[low]
102-030 T1 Size2 sensor Detects whether auto size2 sensor of tray1 is high or low. Input High[low]
102-040 T1 Size3 sensor Detects whether auto size3 sensor of tray1 is high or low. Input High[low]
102-050 T1 Stack Height Sensor Detects if paper in tray1 is elevated to the sensor. Input High[low]
102-060 T1 Paper Low Sensor Detects when the stack height of tray1 is less than 25%. Input High[low]
102-070 Tray2 Home Position Detect when tray2 is closed. Input Closed[Opened]
102-080 T2 Paper Empty Sensor Detect when paper is in tray2. Input High[low]
102-090 T2 Size1 sensor Detects whether auto size1 sensor of tray2 is high or low. Input High[low]
102-100 T2 Size2 sensor Detects whether auto size2 sensor of tray2 is high or low. Input High[low]
102-110 T2 Size3 sensor Detects whether auto size3 sensor of tray2 is high or low. Input High[low]
To Next Page
Loading...
