• Diagnostics > Test Routines > Other > Format HDD
Hard Disk Drive data will be erased. When the HDD seems like has some defects this function can be
executed.
• Diagnostics > Test Routines > Other > Engine Memory Clear
The function resets the engine state to factory default settings.
This function is used to reset the engine to the initial value when the product is functioning abnormally.
All the values are returned to the default values. So it need to execute calibration.
(1. Admin > Setup > Color > Auto Color Tone Adjustment > Setting Color Standard,
2. Admin > Setup > Color > Auto Color Registration)
To Next Page
Loading...
