4-73
Troubleshooting
● Possible Cause:
1. Harness is defective, Connector is not connected properly.
2. Sensor is defective.
● Error message : Tray 2(HCF) door is open. Close it
● Troubleshooting method :
● Symptom : Tray2 or HCF door is opened.
● Code : 01-001
2. Check if the Harness is defective.
Check if the connector is connected properly.
3. Check if the UI message on panel is changed.
1. Remove the HCF or Tray2 Cover.
To Next Page
Loading...
