4-137
Troubleshooting
● Possible Cause : GUI data communication error between video board and OPE board.
● Error message : System error: #10-004. Please turn off then on
● Troubleshooting method :
1.Check if the connector on OPE board is connected properly. Reconnect it.
If the problem persists, replace the OPE board.
2. If the problem persists after replacing the OPE board, replace the video board.
● Symptom : Machine operation is abnormal.
● Code : 10-004
< Turn up OPE >
< Check the OPE connector >
To Next Page
Loading...
