SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 2
ACTION DISPLAY
1.
Select 505
OLD:1060198:1220
NEW : MMDDYY:HHMM
2. Enter new time and date using above table
OLD:1060198:1220
NEW:2070798:1545
3. Verify time and date
Reenter if necessary
OLD:2070798:1545
NEW: MMDDYY:HHMM
4. Press the right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPEAKER to store and advance to the
next program.
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Reenter the correct date and time. If the information you entered is incorrect, re-
peat the procedure.
3.3 RESET STATION PASSCODES TO DEFAULT
[MMC 101]
Individual keyset users can set or change their individual passcodes. These passcodes
are used to lock and unlock keysets, override toll restriction (call barring) and access the
DISA feature. At times, it may be necessary for the system administrator to reset a sta-
tion's passcode to default "1234". This program is used only to reset the passcodes and
cannot be used to display them.
PROGRAM KEYS
UP & DOWN Select the extension number.
HOLD Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 101
[201] PASSCODE
PASSCODE:
✱✱✱✱
2.
Dial the station number (e.g., 205)
OR use the UP and DOWN keys to scroll through the
[205] PASSCODE
PASSCODE:
✱✱✱✱
keyset numbers and press the right soft key to move
the cursor right
3.
Press HOLD to reset passcode
[205] PASSCODE
PASSCODE: 1234
To Next Page
Loading...
