Samsung DCS-816 - MMC: 102 CALL FORWARD

SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 11
ACTION DISPLAY
1.
Select 606
FREE LIST:60
SYSTEM:20
2. Press right soft key to advance cursor
FREE LIST:60
SYSTEM:20
3.
Press UP or DOWN key to select SYSTEM to program
system speed dials, or EXT (extension) to program per-
sonal speed dials
If you select EXT, go to step 5
If you select SYSTEM, press right soft key and go to step
4
FREE LIST:60
SYSTEM:20
4. Enter valid number of blocks to assign
OR press UP or DOWN key to select and press right soft
key
OR press HOLD to delete block(s)
System returns to step 3 to make another selection
(If finished go to step 6)
5. Enter desired EXT (extension) number via keypad (e.g.,
205) OR press UP or DOWN key to make selection and
press right soft key to advance cursor
FREE LIST:60
EXT205:1
6. Enter valid number of blocks (0–5)
OR press UP or DOWN key to make selection
OR press HOLD key to delete block(s)
FREE LIST:60
EXT205:5
7.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to next pro-
gram
3.12 CREATE PROGRAMMED STATION MESSAGES
[MMC 715]
Up to 20 messages can be programmed. Messages 1-10 are set up by default, but these
can be changed. You can also create 10 additional 16-character messages (11-20) that fit
your company's needs. After programming these messages, inform station users.
PROGRAM KEYS
UP & DOWN Select the message number.
KEYPAD Used to enter characters.
HOLD Press to clear entry.
Open customer programming and follow the instructions below.