SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 16
4.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
3.17 ADDING NAMES TO THE TRANSLATION TABLE
[MMC 728]
This program allows the system administrator to associate a CLIP number received from
the central office with a name programmed in this translation table.
The translation table consists of 200 entries, each comprising a 16-digit telephone number
and a 16-digit name.
The procedure for entering names is as described in “Procedure for Entering Names” un-
der section 3.4 Program Station Names.
PROGRAM KEYS
UP & DOWN Used to scroll through options.
KEYPAD Used to enter selections.
SOFT KEYS Move cursor left and right.
SPEAKER Used to store data and advance to next program.
HOLD Used to clear previous entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 728
CLIP XLAT (001)
DIGIT :
2.
Dial an entry number (e.g., 005)
OR use UP or DOWN to scroll through entries and
CLIP XLAT (005)
DIGIT : _
press the right soft key to select entry
CLIP XLAT (005)
DIGIT : 3054264100
3. Enter the telephone number and press right soft key
to advance to name entry
OR enter the telephone number and press the left soft
key to return to step 2
CLIP XLAT (005)
SAMSUNG TELECOM
4. Enter associated name and press right or left soft key
to return to step 2
OR press SPEAKER to save and advance to the next
program
OR press TRSF to save and exit programming
To Next Page
Loading...
