Samsung DCS-816 - Programming Account Codes

SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 14
PROGRAM KEYS
UP & DOWN Select option
KEYPAD Used to enter extender codes.
HOLD Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 107 [201] KEY EXTEND
01 : CALL1
2.
Dial the station number (e.g., 205)
OR use UP or DOWN to scroll through the station
[205] KEY EXTEND
01 : CALL1
numbers and press the right soft key to move the cur-
sor
3. Enter the key number (e.g., 18)
OR use UP and DOWN to scroll through the keys and
[205] KEY EXTEND
18 : DS
use the right soft key to move the cursor
OR press the key to be programmed
4. Dial the extender according to the list above and the
system displays your selection. If there are no more
[205] KEY EXTEND
18 : DS207
entries, press the left soft key to return to step 2
5.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
3.15 PROGRAMMING ACCOUNT CODES
[MMC 708]
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD Used to enter the account code (allowable digits 0-9).
UP & DOWN Used to select entry number.
FLASH & TRSF Used to view and change only the used entries.
HOLD Used to clear data.
Open customer programming and follow the instructions below.