SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 7
5.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
3.8 PROGRAM SYSTEM SPEED DIAL NAMES
[MMC 706]
This procedure allows a name to be assigned to each system speed dial location. This
name enables you to locate the speed dial number when you are using the directory dial
feature. You may assign a name up to 11 characters long.
PROGRAM KEYS
UP & DOWN Used to scroll through options.
KEYPAD Used to enter selections.
SOFT KEYS Move cursor left and right.
SPEAKER Used to store data and advance to next program.
HOLD Used to clear previous entry.
F Toggle to MMC 705
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 706
SYS SPEED NAME
500:
2.
Dial the system speed number (e.g., 505)
OR press UP or DOWN to select the entry number
SYS SPEED NAME
505:
and press the right soft key to move the cursor
3. Enter the name as shown in 3.4 Program Station
Names
SYS SPEED NAME
505: SAMSUNG
4.
Press the right soft key to return to step 2 OR press
the F key to toggle to 3.7 Program System Speed Dial
Numbers, step 4
OR press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
To Next Page
Loading...
