SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 13
press ANS/RLS to select all stations
[ALL] ALM REM (1)
HHMM : ->NOTSET
3.
Dial 1 or 2 to select the alarm (e.g., 2)
OR press UP or DOWN to select the alarm and press
[205] ALM REM (2
)
HHMM : ->NOTSET
the right soft key to move the cursor
OR press the left soft key to return to step 2
4. Enter the alarm time in 24-hour clock format (e.g.,
1300 for 1pm) and the display will automatically ad-
vance to step 5
[205] ALM REM (2)
HHMM : 1
300->NOTSET
5. Enter the alarm type from the list above
OR press UP or DOWN to select the alarm type and
[205] ALM REM (2)
HHMM : 1300 ->D
AILY
press the right soft key to move the cursor
6. Enter the messages using the procedure in 3.4 Pro-
gram Station Names and press the right soft key to
[205] ALM REM (2)
MEETING
return to step 2
7.
Press
TRSF
to store and exit programming
OR press
SPEAKER
to store and advance to the next
program
3.14 PROGRAMMING STATION KEY EXTENDERS
[MMC 107]
You can view station key assignments and add extenders to some of the programmable
keys for easy one-touch operation of frequently-used features.
An extender is a number that makes an otherwise general soft key very specific. Adding
the digit 4 to a PAGE key defines this key for paging zone four, for example. And adding
205 to a DP key defines this key as pickup for extension 205 only. The soft key must al-
ready be assigned by the installing technician. Adding extenders allows one-touch opera-
tion for that feature.
Use this program to assign extenders to the following keys:
KEY FUNCTION EXTENDER
BOSS Boss and Secretary 1-4
DIR Directory PERS(1), SYS(2), or STN(3)
DP Direct Pickup Station/Station group no.
DS Direct Station Select Station/Station group no.
FWRD Call Forward 0-5
GPIK Group Pick-Up 01-08
IG In/Out of Group 500-509
MMPG Meet Me Page 0-4, 5,
✱
PAGE Page 0-4, 5,
✱
PMSG Programmed Message 01-20
SP UCD Supervise UCD group no.
SPD Speed Dial 00-49, 500-799
VT Voice Mail Transfer VM/AA group no.