SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 5
3.6 PROGRAM STATION GROUP NAMES
[MMC 602]
This program is used to assign a name or identification to each station group (501-504).
You may assign a name up to 11 characters long.
PROGRAM KEYS
UP & DOWN Select number and move cursor.
KEYPAD Used to enter characters.
HOLD Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 602
[501] SGR NAME
2.
Dial the group number (e.g., 504)
OR press the UP or DOWN key to make a selection
[504] SGR NAME
and press the left or right soft key to move the cursor
3. Enter the name using the procedure in 3.4 Program
Station Names
[504] SGR NAME
SAMSUNG
4. Press the left or right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
To Next Page
Loading...
