Samsung DCS-816 - Set Alarm;Appointment Reminder with Message

SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 12
ACTION DISPLAY
1.
Select 715 PGM MESSAGE (01)
IN A MEETING
2.
Dial in the message number (e.g., 11)
OR press UP or DOWN to make the selection and
PGM MESSAGE (11)
EMPTY MESSAGE
press the right soft key to move the cursor
3. Enter the message using the procedure in 3.4 Pro-
gram Station Names and press the right soft key to
PGM MESSAGE (11)
IN THE SHOWROOM
return to step 2 above
4.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
3.13 SET ALARM/APPOINTMENT REMINDER WITH MESSAGE
[MMC 116]
Station users can set their own alarm/appointment reminders. However, the system
administrator can also set alarms with messages for any or all display keyset stations in
the system. Up to two alarms can be set for each station and each alarm can be set as
follows:
ALARM TYPE
0 NOTSET
1 TODAY
2 DAILY
PROGRAM KEYS
UP & DOWN Select option
HOLD Press to clear data.
KEYPAD Used to enter data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 116 [201] ALM REM (1)
HHMM : ->NOTSET
2.
Dial the station number (e.g., 205)
OR press UP or DOWN to select the station and
[205] ALM REM (1)
HHMM : ->NOTSET
press the right soft key to move the cursor
OR