SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
3 - 15
ACTION DISPLAY
1.
Select 708
ACCOUNT CODE
001:
2.
Dial the account code entry (e.g., 005)
OR press UP or DOWN to select the entry number
ACCOUNT CODE
005:
and press the right soft key to move the cursor
3.
Enter the account code via the keypad, e.g., 1234
(maximum of 12 digits) and press the right soft key to
ACCOUNT CODE
005: 123456789012
move the cursor back to step 2
4.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
3.16 SETTING INDIVIDUAL FORWARD NO ANSWER TIMERS
[MMC 502]
Each station can have an individual call Forward No Answer timer to accommodate differ-
ent individual work habits of station users. If adjusting this timer (in MMC 501), take care
that the value is not greater than the Transfer Recall timer value. The range is 001-255
seconds.
PROGRAM KEYS
KEYPAD Used to set timer values.
UP & DOWN Used to select extension number.
ANS/RLS Select all stations
Open customer programming and follow the instructions below.
ACTION DISPLAY
1.
Select 502
[201] NO ANS FWD
010 SEC ->_
2.
Dial the station number (e.g., 205)
OR press UP or DOWN key to select the station and
[205] NO ANS FWD
010 SEC ->_
press the right soft key
OR press ANS/RLS to select all stations
OR press the right soft key
[ALL] NO ANS FWD
010 SEC-> _
3.
Enter the new value via the dial pad, e.g., 020 (must
be three digits) and the system will return to step 2
[205] NO ANS FWD
010 SEC-> 020
To Next Page
Loading...
