Samsung DCS-816 - Page 30

SAMSUNG System Administration and Special Features Guide
DCS-816 March 1999
SYSTEM ACCESS CODES
The DCS-816 system has the following preset (default) feature access codes. These
codes can be used if a key is not available for the feature you want to use. Standard (Sin-
gle Line) Telephone users must always dial these codes.
9 Local trunk group 53+grp+1 In group
10 + xxx Retrieve parked calls 54+zone Meet Me Page
11 Put calls on and take calls off
hold
55 + 0 Page all internal zones
12 +xxx Retrieve calls on hold at an-
other station
55 + 1 Page internal zone 1
13 Door lock release 55 + 2 Page internal zone 2
16 + xxx Make speed dial calls 55 + 3 Page internal zone 3
17 Save number and redial it 55 + 4 Page internal zone 4
18 Recall dial tone for new call 55 + 5 Page external zone 5
19 Last number redial 55 +
✱
All Page
2xx Extension numbers 56 Meet Me Answer
400 Cancel Do not Disturb 58 DISA alarm clear
401 Set Do Not Disturb 59 Walking class of service
41 Set Message No Ring 600 Cancel all call forwarding
42 + xxx Cancel message 601 + xxx Set Forward All Calls
43 Set/return messages 602 + xxx Set Forward Busy
44 Busy station/line callback 603 + xxx Set Forward No Ans
45 Busy station camp-on 604 + xxx Set Fwd Busy/No Ans
46 Set up a conference 605 + xxx Set Fwd Follow me
47 Enter account code 65 Directed call pickup
48 Set programmed station
message
66 Group call pickup
49 Send flash to outside line 67 Universal Answer
500 Operator group 7xx Individual line numbers
5xx Station hunt group 78xx ISDN S
0
numbers
53+grp+0 Out of group 0 Call attendant or system operator
If your system installer has programmed different feature access codes to those shown
above, you can enter these codes in the following ‘Changed System Access Codes’ table
for your convenience.