Insulation
No gap
Heat resistant polyethylene foam
Insulation cover
pipe
Insulation pipe
Be sure to overlap the insu
-
lation
Body
CAUTION
Must fit tightly against
body without any gap.
Once you have checked that there are no leaks in the system, you can insu-
late the piping and hose.
1
To avoid condensation problems, place heat-resistant polyethylene
foam separately around each refrigerant pipe.
◆ Always make the seam of pipes face upwards.
Note
2
Wind insulating tape around the pipes.
3
Finish wrapping insulating tape around the rest of the pipes leading to
the outdoor unit.
To Next Page
Loading...
