Samsung DH094EAMC - Setting up the Mode Option

E-21
ENGLISH
ESPAÑOLITALIANOITALIANOPORTUGUÊSDEUTSCH
EΛΛHNIKA
RUSSIAN
1
2
3
4
5
6
Setting Up the Mode Option
Setting Option Setup Method
For example) Option Code :
1
Prepare of the Option Setup mode.
a. Take out the batteries of remote control.
b. Press the button simultaneously and insert the battery again.
c. Make sure the remote control display shows as .
2
Enter the Option Setup mode and select your option according to the
following procedure.
The default value is . Otherwise, push the button to .
◆ Every time you press the button, the display panel reads or
repeatedly.
1
2
Press the button to set the display panel to .
◆ Every time you press the button, the display panel reads
repeatedly.
...
3
Press the button to set the display panel to .
◆ Every time you press the button, the display panel reads
repeatedly.
...
4
Press the button to set the display panel to .
◆ Every time you press the button, the display panel reads
repeatedly.
...
5
Press the button to set the display panel to .
◆ Every time you press the button, the display panel reads
repeatedly.
...
6
Press the button to set the display panel to .
◆ Every time you press the button, the display panel reads
repeatedly.
...
Setting is not required if you want to input
. is displayed by default.
DB98-27157A(1)_E.indd 21 2007-1-23 13:06:49