Accessories
Drain Pump and
FloatSwitch(1)
M4 X 12
TappedScrew (4)
Cable-Tie (3) Insulation Drain (2) Drain Hose (1)
Remove the air filter.
1
Assemble the drain socket as seen in the picture after removing the rub-
bercap.
2
Assemble the float switch with the drain pump.
3
Connect the drain hose.
4
Attach the drain hose tightly with the cable tie or a bondingagent
so that it does not get removed or water does not drain.
Note
Drain pump andfloat
switch
Drain hose
Drain Pump Installation (Optional)
Drain socket
To Next Page
Loading...
