Samsung DVM - Page 30

30
SETTING
Status Setting an option
SEG4 SEG5
3 Setting SEG4, SEG5 option
Press [Fan
∨
] button to enter SEG4 value.
Press [Fan
∧
] button to enter SEG5 value.
Each time you press the button, [SEG image] will be
selected in rotation.
4 Setting Dry mode
Press [Mode] button to change to Dry mode in the On
status.
SEG6 SEG8
5 Setting SEG6, SEG8 option
Press [Fan
∨
] button to enter SEG6 value.
Press [Fan
∧
] button to enter SEG8 value.
Each time you press the button, [SEG image] will be
selected in rotation.
6 Setting Fan mode
Press [Mode] button to change to Fan mode in the On
status.
SEG9 SEG10
7 Setting SEG9, SEG10 option
Press [Fan
∨
] button to enter SEG9 value.
Press [Fan
∧
] button to enter SEG10 value.
Each time you press the button, [SEG image] will be
selected in rotation.
8 Setting Heat mode
Press [Mode] button to change to Heat mode in the On
status.
Setting address of FCU KIT and installation option