71
•ISO: Select an ISO value. This controls camera light
sensitivity. It is measured in film-camera equivalents.
Low values are for stationary or brightly-lit objects.
Higher values are for fast-moving or poorly-lit objects.
• Smart stabilization: Activate or deactivate anti-
shake. Anti-shake helps focus when the camera is
moving.
• Save as: Set the device to delete the original photo
when taking photos with rich tone mode.
Video recorder:
• Video size: Select a resolution. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
• Video stabilization: Activate or deactivate anti-shake.
Anti-shake helps focus when the camera is moving.
Settings:
•Location tag: Attach a GPS location tag to the photo.
Note: To improve GPS signals, avoid shooting in locations
where the signal may be obstructed, such as between
buildings or in low-lying areas, or in poor weather
conditions.
Tip: Your location may appear on your photos when you
upload them to the Internet. To avoid this, deactivate the
GPS tag setting.
• Review pics/videos: Set to show photos or videos
after taking them.
• Volume key: Set the device to use the Volume button
to control the shutter or zoom function.
•Timer: Use this for delayed-time shots.
• White balance: Select an appropriate white balance,
so images have a true-to-life color range. The settings
are designed for specific lighting situations. These
settings are similar to the heat range for white-balance
exposure in professional cameras.
•Exposure value: Change the exposure value. This
determines how much light the camera’s sensor
receives. For low light situations, use a higher
exposure.
• Guidelines: Display viewfinder guides to help
composition when selecting subjects.
•Flash: Activate or deactivate the flash.
To Next Page
Loading...
