Samsung Galaxy S6 active - Charge the Battery

5
Assemble Your Device
Getting Started
For a quick check of your battery level, view
the battery charge indicator located in the
upper-right corner of your device’s display.
Asolid color indicates a full charge.
You can also choose to display a percentage
value. Viewing a percentage value can provide
a better idea of the remaining charge on the
battery. For more information, see
( )
Charge the Battery
Note: You should dry the inside of the charging port
before inserting a power connector to charge your
device. If the charging port is not fully dry, your device
may operate abnormally. For example, it may charge
more slowly or overheat.
Caution: Use only Samsung-approved charging
devices. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
Note: It is recommended you fully charge the battery
before using your device for the first time.
1. Insert the USB 2.0 cable into the port.
2. Connect the USB cable to the charging
head, and then plug the charging head into a
standardoutlet.
3. When charging is complete, unplug the charging
head from the outlet and remove the USB cable
from the device.
Note: For fastest charging times, use the Adaptive
Fast Charging charger that came with your device.
This charger provides faster charging only when
connected to devices that support Adaptive
FastCharging.
When to Charge the Battery
When the battery is low and only a few minutes of
operation remain, the device sounds a warning tone
at regular intervals.
In this condition, your device conserves its
remaining battery power by dimming the screen.
When the battery level becomes too low, the device
automatically turns off.
►
Battery.