Samsung Galaxy S6 active - Set Up Your Device

6
Set Up Your Device
Getting Started
Set Up Your Device
Turn Your Device On or Off
Turn the Device On
► Press and hold the Power key until the device
starts up.
Turn the Device Off
1. Press and hold the Power key until the Device
options menu displays.
2. Tap Power off.
3. On the window that displays, tap POWER OFF.
Note: If your device is not responding, press and
hold both the Power and Volume Down keys
simultaneously for more than 7 seconds to restart the
device.
Configure Your Device
When you first turn on your device, you need to set
up a few things.
1. As each screen displays, follow the prompts on
each screen to set up that particular feature.
2. Tap START, NEXT, SKIP, or LATER to progress
to the next screen.
Note: Voice Assistant provides voice prompts
and descriptions of onscreen items to improve
accessibility. During setup, you can enable or disable
Voice Assistant by pressing the Home key quickly
three times (triple-press).
AT&T Ready2Go
During initial set up, the AT&T Ready2Go screen
displays. It guides you through the basics of setting
up your device.
Follow the prompts to transfer content from an old
device, store your contacts in the AT&T Cloud, set
up accounts, and more.
If you tap not now > exit, you can set up your
device later.
To access AT&T Ready2Go at any time:
► From a Home screen, tap Apps >
AT&TReady2Go.
Secure Your Device
Use your device’s screen lock features to secure
your device.
Lock the Device
By default, the device locks automatically when the
screen times out.
To lock the device:
► Press the Power key.
Unlock the Device
The default Screen lock on your device is Swipe.
To unlock your device:
► Press the Power key or Home key, and then
touch and drag your finger across the screen.
Set Up a Secure Screen Lock
The default Screen lock is Swipe, which offers no
security. To choose a more secure screen lock,
see Screen Lock.