Samsung NX500 - Reducing the Red-Eye Effect; Adjusting the Flash Intensity

107
Shooting Functions > Flash
Reducing the red-eye eect
When you capture a photo of a person in the dark using the ash, a red
glow may appear in their eyes. To reduce this red-eye eect, select Auto
Red-eye or Fill-in Red.
Without red-eye reduction With red-eye reduction
When the red-eye reduction function is used, there are two separate ashes. The
subject should not move until after the second ash. If the subject is too far from
the camera or moves after the rst ash res, red-eye may not be reduced.
Adjusting the ash intensity
When the ash is on, adjust the ash intensity +/-2 levels.
To set the ash
intensity,
In Shooting mode, select [m] ĺ b ĺ Flash ĺ an
option
ĺ [D] ĺ scroll command dial 1 or 2 or press
[C/F] to adjust the ash intensity.
Back Set Reset
Flash : Fill-in