Shooting Functions
The AF area function changes the positions of the focus area.
Generally, cameras focus on the nearest subject. When there are multiple
subjects, however, unwanted subjects can be in focus. To prevent
unwanted subjects from being in focus, change the focus area so that
a desired subject is in focus. You can get a clearer and sharper photo by
selecting an appropriate focus area.
To set the auto focus
area,
In Shooting mode, press [m]
ĺ
b
ĺ
AF Area
ĺ
an option.
Available options may dier depending on shooting conditions.
When the AF/MF switch is set to MF, you cannot change the AF area from the
shooting menu.
Selection AF
You can set the focus on an area you want. Apply an out-of-focus eect to
make the subject more distinguishable.
The focus on the photo below was repositioned and resized so that it ts
the subject’s face.
To resize or move the focus area, in Shooting mode, press [o]. Use command
dial 2 to move the focus area. Scroll command dial 1 to resize the focus area.
AF area
To Next Page
Loading...
