Samsung NX500 - Setting Wireless Sync for External Flash

109
Shooting Functions > Flash
Option Description
Flash Mode
 A-TTL: In the A-TTL (Advanced Through The Lens) mode,
the camera measures the light reected by the subject
through the lens. Then, it calculates the optimum
exposure based on the exposure value and shutter
speed.
 Manual Flash: The ash emits the full amount of light or
the ash intensity can be adjusted manually.
 Multi Flash: When you press [Shutter], the ash res
multiple times based on the number you have set.
Flash EV
Set the exposure of the ash when the ash mode is
A-TTL.
Flash Output
Set the brightness of the ash when the ash mode is
Manual Flash.
Multi Flash
Settings
Set the count, brightness, or frequency of the ash when
the ash mode is Multi Flash.
If data can be exchanged between the camera and the ash, the settings for the
external ash can be adjusted on the camera or the ash. Your previous options
will be applied.
Setting wireless sync for external ash
Set wireless sync to control internal and external ash units remotely
via wireless signals. The remote system consists of a master ash that is
mounted on the camera and one or more slave ash units. A slave ash is
assigned to one of three groups: A, B, or C.
To set wireless sync,
In Shooting mode, press [m] ĺ b ĺ External Wireless
Flash
ĺ an option.