162
Connecting & Transferring
Connecting to a computer
Using Auto Backup for photos or videos
You can send photos or videos that you captured with the camera to a PC
wirelessly.
Installing the program for Auto Backup on your PC
1
Connect the camera to the PC with the USB cable.
2
Turn on the i-Launcher program, and then select PC Auto
Backup.
The Auto Backup program is installed on the PC. Follow the on-
screen instructions to complete the installation.
3
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
Using the Auto Backup feature
1
In Playback mode, select a le, and then touch
ĺ
.
In thumbnail view, you cannot use the Auto Backup feature.
If the pop-up message that prompts you to download the
application appears, select Next.
The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 150)
2
Select a backup PC.
To Next Page
Loading...
