Samsung NX500 - Using the Smart Panel; E.g. Adjust the Exposure Value in P Mode

My Camera > Selecting functions (options)
42
Using the smart panel
Press [f] or touch on the screen to access some functions such as
Exposure, ISO, and White Balance.
E.g. Adjust the exposure value in P mode
1
Rotate the mode dial to P.
2
Press [f] or touch .
3
Scroll command dial 2 or press [D/I/C/F] to move to
EV, and then press [o].
 You can directly select an option by scrolling command dial 1
without having to press [o].
 You can also select an option by touching it.
EV : 0.0
Adjust
Key MappingBack
You can adjust some options by
dragging them.
4
Scroll command dial 1 or command dial 2 or press [C/F] to
adjust the exposure value, and then press [o].
 You can also drag the dial on the screen, and then touch Set to
adjust the option.
EV
Back
Set